<?xml version="1.0" encoding="UTF-8"?><metadata>
Coastal Erosion Hazard Areas (CEHA) DescriptionGeographic Data
Set:Coastal Erosion Hazard Areas (CEHA)
Distribution Constraints:Contact DEC Coastal Erosion Management
Unit,
Central Office 518-402-8151
<descript>This data set contains areas that have been designated</descript>
as Coastal Erosion Hazard Areas under Article 34 of the NYS
Environmental Conservation Law. Coastal Erosion Hazard Areas are
those areas of coastline identified as Natural Protective Features
(dunes, bluffs, beaches, and nearshore areas) or Structural Hazard
Areas which are found along stretches of shoreline which have a
long-term, average, annual recession rate of a foot or more per
year.
Law:Article 34 of NYS Environmental Conservation Law, Coastal
Erosion Hazard Areas Act
Regulation:Article 34 of NYS Environmental Conservation Law,
Coastal Erosion Hazard Areas Act, 6 NYCRR Part 505, Coastal Erosion
Management Regulations
Available:Statewide
Completion or Most Recent Revision Date:September 2004
Type of Data:ArcView Line Shapefile with Theme Attribute Table
Source of Information:Lines were heads-up digitized at 1:2400 scale
from official Coastal Erosion Hazard Areas maps pursuant to 6 NYCRR
Part 505. Lines were digitized in ArcView using the Digital Ortho
Aerial Imagery by County Theme.
Projection and Map Units:NYTM in meters, NAD 83 horizontal datum
<attr>Tables:Items (or Fields) in the CEHA Attribute Tables</attr>
Contact:Questions regarding Coastal Erosion Management or requests
for copies of Coastal Erosion Hazard Area (CEHA) Maps should be
directed to:
Robert McDonough
Coastal Erosion Management
Bureau of Program Resources &amp; Flood Protection
Albany, NY 12233-3507
Phone: 518-402-8147
Email: rsmcdono@gw.dec.state.ny.us
<documnts>Date:</documnts>
Usage Notes:
This data set was developed to represent Natural Protective Feature
Areas (NPFA) and Structural Hazard Areas (SHA) as depicted on official
CEHA maps. However, when viewing either a NPFA landward limit line or a
SHA line, it is important to note that the CEHA Maps filed with the
municipality being viewed are the official documents containing the
legally defined NPFA and SHA boundary lines. Please use the updated,
official CEHA map on file at the local municipality, county, or the
Coastal Erosion Management section when making decisions on or planning
any regulated activities near the CEHA jurisdiction. Additional copies
can be ordered at the address provided above.
When accessing the data using the MHDB Data Selector:
Historical data will be available, and the most recent version will
appear at the end of the selection list. Other versions can be added
to the view to assess change over time. The corresponding buffer file
will also be added to the view.
The dotted lines represent the boundary of a SHA which are those
shoreland areas located landward of natural protective features areas
and have shorelines receding at a long-term annual average recession
rate of 1 foot or more per year. SHA lines are established at 40 times
the long-term annual average recession rate, setback from the CEHA
boundary line. The setback varies based on transitions between
specific features found in the field as well as transitions where
changes in recession rates occur.
CEHA jurisdiction extends 1,000 feet seaward of the mean low water or
a depth of 15 feet, whichever is greater. The 1,000 foot buffer (blue)
on the seaward side of the NPFA landward limit line has been placed as
a reminder of the seaward limit of the nearshore area which is
regulated as a Natural Protective Feature.
Because of limitations on the accuracy of the heads-up digitized
results, a 100 foot buffer (brown) has been placed landward of the
NPFA landward limit line in order to warn users of this dataset that
these areas are in close proximity to the NPFA landward limit line. As
such, any potentially regulated activities being considered in this
area should be reviewed using the corresponding official CEHA map
available from the Coastal Erosion Management section at the address
listed above.
<attr>Tables</attr>
Items (or Fields) in the Coastal Erosion Hazardous Areas Attribute Table
Length:Length of the CEHA line segment in meters.
Photo:Aerial photo series number followed by the last two digits of
the year in which the photos were taken.
Sheet:Sheet number of the map series.
Town:Town where the CEHA is located.
Village:Village where the CEHA is located.
County:County where the CEHA is located.
Comments:Additional information about the hazard area.
Rate of Recession:Average rate at which the eroding shoreline moves
landward, expressed in feet per year.
Swis_code:Geographical identification number related to
municipalities used by the Department in applications.
Date Amended:Date the CEHA line was revised pursuant to 6NYCRR Part
505, sections 505.21 and 505.22.
Back to Attribute Tables
<Esri>
<CreaDate>20160915</CreaDate>
<CreaTime>12510000</CreaTime>
<SyncOnce>FALSE</SyncOnce>
<SyncDate>20140129</SyncDate>
<SyncTime>09424800</SyncTime>
<ModDate>20140129</ModDate>
<ModTime>09424800</ModTime>
<DataProperties>
<itemProps>
<itemName Sync="FALSE">EH_CEHA_Line</itemName>
<imsContentType Sync="TRUE">002</imsContentType>
<nativeExtBox>
<westBL Sync="TRUE">1462569.824515</westBL>
<eastBL Sync="TRUE">1575236.121491</eastBL>
<southBL Sync="TRUE">280858.831048</southBL>
<northBL Sync="TRUE">349216.796694</northBL>
<exTypeCode Sync="TRUE">1</exTypeCode>
</nativeExtBox>
</itemProps>
<coordRef>
<type Sync="TRUE">Projected</type>
<geogcsn Sync="TRUE">GCS_North_American_1983</geogcsn>
<csUnits Sync="TRUE">Linear Unit: Foot_US (0.304801)</csUnits>
<projcsn Sync="TRUE">NAD_1983_StatePlane_New_York_Long_Island_FIPS_3104_Feet</projcsn>
<peXml Sync="TRUE">&lt;ProjectedCoordinateSystem xsi:type='typens:ProjectedCoordinateSystem' xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xmlns:xs='http://www.w3.org/2001/XMLSchema' xmlns:typens='http://www.esri.com/schemas/ArcGIS/10.0'&gt;&lt;WKT&gt;PROJCS[&amp;quot;NAD_1983_StatePlane_New_York_Long_Island_FIPS_3104_Feet&amp;quot;,GEOGCS[&amp;quot;GCS_North_American_1983&amp;quot;,DATUM[&amp;quot;D_North_American_1983&amp;quot;,SPHEROID[&amp;quot;GRS_1980&amp;quot;,6378137.0,298.257222101]],PRIMEM[&amp;quot;Greenwich&amp;quot;,0.0],UNIT[&amp;quot;Degree&amp;quot;,0.0174532925199433]],PROJECTION[&amp;quot;Lambert_Conformal_Conic&amp;quot;],PARAMETER[&amp;quot;False_Easting&amp;quot;,984250.0],PARAMETER[&amp;quot;False_Northing&amp;quot;,0.0],PARAMETER[&amp;quot;Central_Meridian&amp;quot;,-74.0],PARAMETER[&amp;quot;Standard_Parallel_1&amp;quot;,40.66666666666666],PARAMETER[&amp;quot;Standard_Parallel_2&amp;quot;,41.03333333333333],PARAMETER[&amp;quot;Latitude_Of_Origin&amp;quot;,40.16666666666666],UNIT[&amp;quot;Foot_US&amp;quot;,0.3048006096012192],AUTHORITY[&amp;quot;EPSG&amp;quot;,2263]]&lt;/WKT&gt;&lt;XOrigin&gt;-120039300&lt;/XOrigin&gt;&lt;YOrigin&gt;-96540300&lt;/YOrigin&gt;&lt;XYScale&gt;3048.0060960121914&lt;/XYScale&gt;&lt;ZOrigin&gt;0&lt;/ZOrigin&gt;&lt;ZScale&gt;1&lt;/ZScale&gt;&lt;MOrigin&gt;0&lt;/MOrigin&gt;&lt;MScale&gt;1&lt;/MScale&gt;&lt;XYTolerance&gt;0.0032808333333333335&lt;/XYTolerance&gt;&lt;ZTolerance&gt;0.001&lt;/ZTolerance&gt;&lt;MTolerance&gt;0.001&lt;/MTolerance&gt;&lt;HighPrecision&gt;true&lt;/HighPrecision&gt;&lt;WKID&gt;2263&lt;/WKID&gt;&lt;/ProjectedCoordinateSystem&gt;</peXml>
</coordRef>
</DataProperties>
<ArcGISFormat>1.0</ArcGISFormat>
</Esri>
<dataqual>
<lineage>
<procstep>
<procdesc Sync="TRUE">Metadata imported.</procdesc>
<srcused Sync="FALSE">withheld</srcused>
<procdate Sync="TRUE">20100628</procdate>
<proctime Sync="TRUE">14213600</proctime>
</procstep>
</lineage>
</dataqual>
<idinfo>
<native Sync="FALSE">ESRI ArcCatalog 9.3.1.3000</native>
<descript>
<langdata Sync="TRUE">en</langdata>
<abstract>REQUIRED: A brief narrative summary of the data set.</abstract>
<purpose>REQUIRED: A summary of the intentions with which the data set was developed.</purpose>
</descript>
<citation>
<citeinfo>
<origin>REQUIRED: The name of an organization or individual that developed the data set.</origin>
<pubdate>REQUIRED: The date when the data set is published or otherwise made available for release.</pubdate>
<title Sync="FALSE">EH_CEHA_Line</title>
<ftname Sync="FALSE">EH_CEHA_Line</ftname>
<geoform Sync="TRUE">vector digital data</geoform>
<onlink Sync="FALSE">withheld</onlink>
</citeinfo>
</citation>
<timeperd>
<current>REQUIRED: The basis on which the time period of content information is determined.</current>
<timeinfo>
<sngdate>
<caldate>REQUIRED: The year (and optionally month, or month and day) for which the data set corresponds to the ground.</caldate>
</sngdate>
</timeinfo>
</timeperd>
<status>
<progress>REQUIRED: The state of the data set.</progress>
<update>REQUIRED: The frequency with which changes and additions are made to the data set after the initial data set is completed.</update>
</status>
<spdom>
<bounding>
<westbc Sync="TRUE">-72.269019</westbc>
<eastbc Sync="TRUE">-71.855385</eastbc>
<northbc Sync="TRUE">41.112172</northbc>
<southbc Sync="TRUE">40.917764</southbc>
</bounding>
<lboundng>
<leftbc Sync="TRUE">1462569.824515</leftbc>
<rightbc Sync="TRUE">1575236.121491</rightbc>
<bottombc Sync="TRUE">280858.831048</bottombc>
<topbc Sync="TRUE">349216.796694</topbc>
</lboundng>
</spdom>
<keywords>
<theme>
<themekt>REQUIRED: Reference to a formally registered thesaurus or a similar authoritative source of theme keywords.</themekt>
<themekey>REQUIRED: Common-use word or phrase used to describe the subject of the data set.</themekey>
</theme>
</keywords>
<accconst>REQUIRED: Restrictions and legal prerequisites for accessing the data set.</accconst>
<useconst>REQUIRED: Restrictions and legal prerequisites for using the data set after access is granted.</useconst>
<natvform Sync="FALSE">Feature Class</natvform>
</idinfo>
<dataIdInfo>
<envirDesc Sync="FALSE">ESRI ArcGIS 10.0.5.4400</envirDesc>
<dataLang>
<languageCode Sync="TRUE" value="eng"/>
<countryCode Sync="TRUE" value="USA"/>
</dataLang>
<idCitation>
<resTitle Sync="FALSE">EH_CEHA_Line</resTitle>
<presForm>
<PresFormCd Sync="TRUE" value="005"/>
</presForm>
</idCitation>
<spatRpType>
<SpatRepTypCd Sync="TRUE" value="001"/>
</spatRpType>
<dataExt>
<geoEle>
<GeoBndBox esriExtentType="native">
<westBL Sync="TRUE">1462569.824515</westBL>
<eastBL Sync="TRUE">1575236.121491</eastBL>
<northBL Sync="TRUE">349216.796694</northBL>
<southBL Sync="TRUE">280858.831048</southBL>
<exTypeCode Sync="TRUE">1</exTypeCode>
</GeoBndBox>
</geoEle>
</dataExt>
<geoBox esriExtentType="decdegrees">
<westBL Sync="TRUE">-72.269019</westBL>
<eastBL Sync="TRUE">-71.855385</eastBL>
<northBL Sync="TRUE">41.112172</northBL>
<southBL Sync="TRUE">40.917764</southBL>
<exTypeCode Sync="TRUE">1</exTypeCode>
</geoBox>
<dataExt>
<geoEle>
<GeoBndBox esriExtentType="search">
<exTypeCode Sync="TRUE">1</exTypeCode>
<westBL Sync="TRUE">-72.269019</westBL>
<eastBL Sync="TRUE">-71.855385</eastBL>
<northBL Sync="TRUE">41.112172</northBL>
<southBL Sync="TRUE">40.917764</southBL>
</GeoBndBox>
</geoEle>
</dataExt>
</dataIdInfo>
<metainfo>
<langmeta Sync="TRUE">en</langmeta>
<metstdn Sync="TRUE">FGDC Content Standards for Digital Geospatial Metadata</metstdn>
<metstdv Sync="TRUE">FGDC-STD-001-1998</metstdv>
<mettc Sync="TRUE">local time</mettc>
<metc>
<cntinfo>
<cntorgp>
<cntper>REQUIRED: The person responsible for the metadata information.</cntper>
<cntorg>REQUIRED: The organization responsible for the metadata information.</cntorg>
</cntorgp>
<cntaddr>
<addrtype>REQUIRED: The mailing and/or physical address for the organization or individual.</addrtype>
<city>REQUIRED: The city of the address.</city>
<state>REQUIRED: The state or province of the address.</state>
<postal>REQUIRED: The ZIP or other postal code of the address.</postal>
</cntaddr>
<cntvoice>REQUIRED: The telephone number by which individuals can speak to the organization or individual.</cntvoice>
</cntinfo>
</metc>
<metd Sync="TRUE">20110914</metd>
</metainfo>
<mdLang>
<languageCode Sync="TRUE" value="eng"/>
<countryCode Sync="TRUE" value="USA"/>
</mdLang>
<mdStanName Sync="TRUE">ISO 19115 Geographic Information - Metadata</mdStanName>
<mdStanVer Sync="TRUE">DIS_ESRI1.0</mdStanVer>
<mdChar>
<CharSetCd Sync="TRUE" value="004"/>
</mdChar>
<mdHrLv>
<ScopeCd Sync="TRUE" value="005"/>
</mdHrLv>
<mdHrLvName Sync="TRUE">dataset</mdHrLvName>
<distinfo>
<resdesc Sync="TRUE">Downloadable Data</resdesc>
</distinfo>
<distInfo>
<distributor>
<distorTran>
<onLineSrc>
<orDesc Sync="TRUE">002</orDesc>
<linkage Sync="FALSE">withheld</linkage>
</onLineSrc>
</distorTran>
<distorFormat>
<formatName Sync="FALSE">Feature Class</formatName>
</distorFormat>
</distributor>
<distFormat>
<formatName Sync="FALSE">Feature Class</formatName>
</distFormat>
</distInfo>
<spdoinfo>
<direct Sync="TRUE">Vector</direct>
<ptvctinf>
<esriterm>
<efeatyp Sync="TRUE">Simple</efeatyp>
<efeageom Sync="TRUE" code="3"/>
<esritopo Sync="TRUE">FALSE</esritopo>
<efeacnt Sync="TRUE">61</efeacnt>
<spindex Sync="TRUE">TRUE</spindex>
<linrefer Sync="TRUE">FALSE</linrefer>
</esriterm>
</ptvctinf>
</spdoinfo>
<spref>
<horizsys>
<cordsysn>
<geogcsn Sync="TRUE">GCS_North_American_1983</geogcsn>
<projcsn Sync="TRUE">NAD_1983_StatePlane_New_York_Long_Island_FIPS_3104_Feet</projcsn>
</cordsysn>
<planar>
<planci>
<plance Sync="TRUE">coordinate pair</plance>
<plandu Sync="TRUE">survey feet</plandu>
<coordrep>
<absres Sync="TRUE">0.000328</absres>
<ordres Sync="TRUE">0.000328</ordres>
</coordrep>
</planci>
</planar>
<geodetic>
<horizdn Sync="TRUE">North American Datum of 1983</horizdn>
<ellips Sync="TRUE">Geodetic Reference System 80</ellips>
<semiaxis Sync="TRUE">6378137.000000</semiaxis>
<denflat Sync="TRUE">298.257222</denflat>
</geodetic>
</horizsys>
<vertdef>
<altsys>
<altenc Sync="TRUE">Explicit elevation coordinate included with horizontal coordinates</altenc>
<altres Sync="TRUE">1.000000</altres>
</altsys>
</vertdef>
</spref>
<refSysInfo>
<RefSystem>
<refSysID>
<identCode Sync="TRUE" value="2263">NAD_1983_StatePlane_New_York_Long_Island_FIPS_3104_Feet</identCode>
<idCodeSpace Sync="TRUE">EPSG</idCodeSpace>
<idVersion Sync="TRUE">7.4.1</idVersion>
</refSysID>
</RefSystem>
</refSysInfo>
<spatRepInfo>
<VectSpatRep>
<geometObjs Name="EH_CEHA_Line">
<geoObjTyp>
<GeoObjTypCd Sync="TRUE" value="002"/>
</geoObjTyp>
<geoObjCnt Sync="TRUE">61</geoObjCnt>
</geometObjs>
<topLvl>
<TopoLevCd Sync="TRUE" value="001"/>
</topLvl>
</VectSpatRep>
</spatRepInfo>
<eainfo>
<detailed Name="EH_CEHA_Line">
<enttyp>
<enttypl Sync="FALSE">EH_CEHA_Line</enttypl>
<enttypt Sync="TRUE">Feature Class</enttypt>
<enttypc Sync="TRUE">61</enttypc>
</enttyp>
<attr>
<attrlabl Sync="TRUE">OBJECTID</attrlabl>
<attalias Sync="TRUE">OBJECTID</attalias>
<attrtype Sync="TRUE">OID</attrtype>
<attwidth Sync="TRUE">4</attwidth>
<atprecis Sync="TRUE">10</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef Sync="TRUE">Internal feature number.</attrdef>
<attrdefs Sync="TRUE">ESRI</attrdefs>
<attrdomv>
<udom Sync="TRUE">Sequential unique whole numbers that are automatically generated.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl Sync="TRUE">LENGTH</attrlabl>
<attalias Sync="TRUE">LENGTH</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">38</atprecis>
<attscale Sync="TRUE">8</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">PHOTO</attrlabl>
<attalias Sync="TRUE">PHOTO</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">15</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">SHEET</attrlabl>
<attalias Sync="TRUE">SHEET</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">14</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">TOWN</attrlabl>
<attalias Sync="TRUE">TOWN</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">22</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">VILLAGE</attrlabl>
<attalias Sync="TRUE">VILLAGE</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">22</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">COUNTY</attrlabl>
<attalias Sync="TRUE">COUNTY</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">16</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">COMMENTS</attrlabl>
<attalias Sync="TRUE">COMMENTS</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">40</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">RATE_OF_RE</attrlabl>
<attalias Sync="TRUE">RATE_OF_RE</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">30</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">SWIS_CODE</attrlabl>
<attalias Sync="TRUE">SWIS_CODE</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">6</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">DATE_AMEND</attrlabl>
<attalias Sync="TRUE">DATE_AMEND</attalias>
<attrtype Sync="TRUE">Date</attrtype>
<attwidth Sync="TRUE">36</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">Shape</attrlabl>
<attalias Sync="TRUE">Shape</attalias>
<attrtype Sync="TRUE">Geometry</attrtype>
<attwidth Sync="TRUE">4</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef Sync="TRUE">Feature geometry.</attrdef>
<attrdefs Sync="TRUE">ESRI</attrdefs>
<attrdomv>
<udom Sync="TRUE">Coordinates defining the features.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl Sync="TRUE">GlobalID</attrlabl>
<attalias Sync="TRUE">GlobalID</attalias>
<attrtype Sync="TRUE">GlobalID</attrtype>
<attwidth Sync="TRUE">38</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">Shape.len</attrlabl>
<attalias Sync="TRUE">Shape.len</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">0</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
</detailed>
</eainfo>
<mdDateSt Sync="TRUE">20140129</mdDateSt>
</metadata>
